Zakuna Insights
Welcome to the Zakuna Blog—your go-to source for the latest in architectural and interior design trends, industry insights, and expert commentary. From big shifts shaping the built environment to spotlight features on our bespoke staircases, doors, and architectural accents, our blog brings together thought leadership and product inspiration in one curated space.

Aluminium Clad Timber Windows Explained
Two products, one phrase
Ask ten people what an aluminium clad timber window is and you will get two answers, both of them using the same words in a different order. It is worth settling that before anything else, because the two things are not the same and the search results mix them freely.
An aluminium clad timber window has a timber frame and sash as its structure, with a separate aluminium profile fixed to the outside face. The timber does the work. The aluminium takes the weather. This is the system almost everyone means, and it is what the rest of this article is about.
Timber clad aluminium would be the reverse: an aluminium structure with a timber lining on the inside face. These exist, mostly in commercial glazing where the structural span matters more than the look, but they are a different product with different costs and different failure modes. If a supplier's quotation and your enquiry are using the phrases interchangeably, that is worth pinning down in writing before anyone orders anything.
What the cladding is actually for
The appeal of a timber window is the inside: the thermal behaviour, the solidity, the way a painted timber reveal sits in a room. The problem with a timber window is the outside, where it faces driving rain, UV and the slow cycle of wetting and drying that eventually finds its way under a coating.
Aluminium cladding separates those two jobs. The timber keeps its position on the inside and stops being the weathering surface. The aluminium, powder coated and effectively inert, becomes the face that takes the abuse. Done properly there is a ventilated cavity or drainage path between the two so that any moisture reaching the timber can get back out again, rather than being sealed against it. That is the single detail that separates a system designed for a long life from one that will fail quietly from the inside.
That last point is worth labouring. A badly executed clad window is worse than an unclad one. Seal timber behind aluminium with no route out for vapour and you have built a trap.
How the two layers are joined
The connection between the aluminium and the timber has to do two contradictory things: hold the cladding firmly in place, and allow it to move. Aluminium and timber expand at different rates and in different directions. Timber moves most across the grain with moisture content; aluminium moves predictably with temperature along its length. A rigid fixing between them will either distort or tear.
Most systems solve this with clips or a retained gasket that grips without pinning, so the cladding can slide a fraction against the frame. When you are comparing systems, this is the mechanism to ask about, and the answer should be specific.
The maintenance claim, honestly
Aluminium clad timber is routinely sold as maintenance free. It is not, and anyone saying so is either simplifying or has not been back to look at a twenty-year-old installation.
What is true is that the maintenance burden moves. There is no external repainting cycle, which is the expensive and disruptive part of owning timber windows and the reason people replace them before they need to. What remains is the internal finish, which lasts far longer in a dry heated room but is still a coating; the gaskets and weather seals, which are consumables; the ironmongery, which wears in proportion to how often the window is opened; and the drainage paths, which need to stay clear.
A realistic ownership picture is a short annual check of seals and drainage, lubrication of the hardware, and an internal redecoration at long intervals. That is a very long way from a painted softwood window, and it is not nothing.
Where the system earns its cost
Aluminium clad timber costs more than timber and more than most aluminium. It is worth it in a reasonably narrow set of situations, and it is worth being honest about which.
It earns its money on exposed elevations, coastal, high, or simply south and west facing with nothing in front of them, where an unclad timber window's coating is on a short cycle. It earns it on large openings, where the sash is heavy and the cost of taking it apart to refinish is disproportionate. It earns it on buildings where access is difficult, because the saving is not really the paint, it is the scaffolding. And it earns it where a client wants a timber interior and a crisp, slim, dark exterior, a combination that neither material delivers on its own.
It earns it least on a sheltered elevation of a modest house where the windows are easy to reach from a ladder. There, good timber windows and a painting cycle may well be the better value, and a supplier who tells you so is worth keeping. Our earlier article on bespoke windows for modern architecture sets out how the three systems compare at a glance.
Judging a system before you buy it
A few questions separate the systems quickly.
Is the cladding a designed profile or a cover? A system developed as a clad window has the cladding in the drawings from the start, with the drainage, the fixing and the corner details resolved. A timber window with aluminium added later usually shows it at the corners and at the cill junction.
What happens at the corners and the cill? This is where water collects and where cheap systems rely on sealant. A mitred, mechanically jointed corner with a gasket behind it will outlive a butted corner with a bead of mastic in it, and you can see the difference by looking.
Is the timber specified, or just "hardwood"? Species, grade and lamination all matter, and engineered laminated sections are more dimensionally stable than solid ones for a reason. A supplier who will name the timber is telling you something.
What is the thermal performance of the whole window, not the glass? A U-value quoted for the glazing unit alone tells you very little about the window. Ask for the whole-window figure.
Who made the hardware? On an opening window the ironmongery is the part that will fail first and the part a client notices. Named hardware from a known manufacturer is a reasonable proxy for how the rest of the window was specified.
And for doors
Everything above applies to aluminium clad timber doors, with the weight of the leaf making the hardware question more important rather than less, and the threshold replacing the cill as the detail most likely to let water in. The searches for clad doors are almost as common as the searches for clad windows, and the reasoning behind choosing them is identical. Our external door range covers the same three constructions.



