Two profile styles — Flush and Interlocking — are available in various widths, which can be applied in different patterns to create the effect you desire. Available in 6m, 4m and 3m lengths, with a depth of 16–18mm. Outer Corners and Beams are also available to complete your installation.

Flush Profile — Regular Pattern

A clean, uniform appearance using boards of a single width, fitted edge to edge with a 5mm expansion gap between each board. The result is a sleek, contemporary finish with consistent shadow lines running the full height of the facade.

Widths: 95mm · 120mm · 145mm | Depth: 16–18mm
Codes: WCFR.95 / WCFR.120 / WCFR.145

Flush Profile — Combining Pattern

A dynamic, textured look created by combining equal amounts of all three board widths (95mm, 120mm and 145mm) in a single run. The variation in width adds visual interest while maintaining the flush, flat-faced character of the profile. 5mm expansion gap between boards.

Widths: Combined (equal mix of 95, 120, 145mm) | Depth: 16–18mm
Code: WCFC.COMB

Flush Profile — Overlapping

Boards are installed with a 15mm overlap, creating a subtle layered effect and deeper shadow lines. This profile offers enhanced weather protection thanks to the overlapping joint, making it an excellent choice for exposed elevations.

Widths: 95mm · 120mm · 145mm | Depth: 16–18mm
Codes: WCFO.95 / WCFO.120 / WCFO.145

Flush Profile with Fins

A bold, architectural profile featuring 28mm x 90mm vertical fins that project from the face of the cladding at regular intervals. The fins create strong vertical emphasis and dramatic light-and-shadow play throughout the day, giving facades a distinctive three-dimensional character.

Widths: 95mm · 120mm · 145mm | Depth: 16–18mm
Codes: WCFF.95 / WCFF.120 / WCFF.145

Interlocking Profile — Regular Pattern

Boards lock together with a precision tongue-and-groove joint, creating a 5mm shadow gap detail for a refined, linear appearance. The interlocking mechanism provides a secure, stable installation with excellent weather resistance. Overlap: 20mm (Larch), 15mm (Nordic Spruce).

Widths: 95mm · 120mm · 145mm | Depth: 16–18mm
Codes: WCIR.95 / WCIR.120 / WCIR.145

Interlocking Profile — Combining Pattern

The same secure interlocking joint as the regular pattern, but using equal amounts of all three board widths for a more varied, organic aesthetic. The combination of widths adds rhythm and visual depth while the interlocking profile keeps joints tight and weatherproof. 5mm expansion gap. Overlap: 20mm (Larch), 15mm (Nordic Spruce).

Widths: Combined (equal mix of 95, 120, 145mm) | Depth: 16–18mm
Code: WCIC.COMB

Our exterior cladding profiles are available in two principal fire-tempered timber materials, each offering natural durability and weather resistance with our proprietary fire tempering technology.

One of the most durable and solid coniferous woods. Its natural rot-resistant qualities make it ideal for exterior cladding, enhanced by our fire tempering technology.

Nordic Spruce is light and elastic with excellent strength. Naturally resistant to moisture and pests, enhanced by fire tempering for superior exterior performance.

Our decorative panel range shares the same extensive choice of materials and finishes as our internal door range, from natural wood veneers and stains to painted colours for interior and sheltered exterior applications.

A choice of premium wood veneers in quarter sawn or crown cut. 20% Satin Lacquer as standard; higher gloss and matt finishes available.

A selection of stains applied to Oak and Walnut panels to enhance the natural grain with a durable finish.

A range of painted colours at varying gloss levels to create your desired effect. 10% Satin Lacquer as standard for a durable protective layer. Any RAL colour available on request.